The set includes SQUEALER controller and SLUDGE probe. It is a modern microprocessor devic for continuous monitoring of the status of selected probes. The basic parameters of the controller is 1 input, 1 relay output, LEDs indicating normal state, failure status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.
SQUEALER-1
– 1 input (overflow, fat layer thickness or oil level, the level of sludge)
– 1 output (potential-free relay)
– 230V power supply
– Hermetic housing used outdoor
– Dipswitch (programming using dipswitches)
– Optical and acoustic signals of troubles and alarms on the front panel
– Sensor diagnostic (opening / short circuit)
SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; work in full immersion of liquid; ATEX certified. Output signal 4-20mA.
Front panel description
– LED green – probe is OK
– LED lights alternately green and red – ALARM
– LED lights alternately yellow and red – FAILURE
– Short press – cancel acoustic alarm signal.
– Long press of the button – device test (LED, BUZER and RELAY). Test possible only in normal state (without alarm).
Technical data
– Power: 230V AC
– Max. fuse: 1.25 A
– Power Consumption (nominal): 2.2 VA
– Output: NO/NC potential-free relay, 2A/120VAC or 2A/24VDC
– Ambient temperature: -40 to + 60 ° C
– Mechanical strength: IK 07
– Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
SET-001 (Sludo, 230V)
Dowiedz się więcej
Measurement of the sludge, silt layer in any type of separator or liquid tank with intergated settler (oil, fat, grease, petroleum substances separators with intergated settler).
1 x SQUEALER-1 (controller)
1 x SLUDO (sludge, silt probe)
Application
– alarm for settlers
– alarm for sedimentation separators
– alarm for silt separators
The set includes SQUEALER controller and SLUDGE probe. It is a modern microprocessor devic for continuous monitoring of the status of selected probes. The basic parameters of the controller is 1 input, 1 relay output, LEDs indicating normal state, failure status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.
SQUEALER-1
– 1 input (overflow, fat layer thickness or oil level, the level of sludge)
– 1 output (potential-free relay)
– 230V power supply
– Hermetic housing used outdoor
– Dipswitch (programming using dipswitches)
– Optical and acoustic signals of troubles and alarms on the front panel
– Sensor diagnostic (opening / short circuit)
SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; work in full immersion of liquid; ATEX certified. Output signal 4-20mA.
Front panel description
– LED green – probe is OK
– LED lights alternately green and red – ALARM
– LED lights alternately yellow and red – FAILURE
– Short press – cancel acoustic alarm signal.
– Long press of the button – device test (LED, BUZER and RELAY). Test possible only in normal state (without alarm).
Technical data
– Power: 230V AC
– Max. fuse: 1.25 A
– Power Consumption (nominal): 2.2 VA
– Output: NO/NC potential-free relay, 2A/120VAC or 2A/24VDC
– Ambient temperature: -40 to + 60 ° C
– Mechanical strength: IK 07
– Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
In stock
- Free shipping on all orders above 50,00
- No hassle returns, 30 days return
- Next day delivery within your country
Feel free to Get in touch
Related products
SET-001 (Sludo, 230V)
Dowiedz się więcej